Paragon 2-piece Rotors (Rear Pair) for Infiniti Q50
Paragon Performance 2-piece Rotor offers superior braking and cooling efficiency optimized for track and race applications. It features directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking under harsh track condition.
Made of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.
Vibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.
Center hats are CNC machined from steel for high strength and durability under extreme conditions, then anodized to increase resistance to wear and corrosion. Iron sleeves are integrated into the center hats to allow the use of OEM e-brake.
Direct bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. Compatible with OEM brake pads or aftermarket pads with the same pad depth (D)
Directional ventilation vanes for optimal cooling performance, runs up to 30% cooler than O.E. rotors and increase cooling efficiency by up to 30%
Floating 2-piece design
Minimizing brake fade & judder during extended sessions
Weighs 19.18 lbs (8.7 kg)
Center hats only available in black anodized finish for this application
***Fits Q50 with OEM Akebono Sport Brakes***
Direct replacement of: OEM Infiniti part # 43206-1CA0A
Includes:
One pair of Paragon Performance 350mm x 20mm (13.78 x 0.79) 2-piece rotor assemblies with black anodized steel center hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)
Detailed installation manual
Part # (w/ black anodized hat): P2R.023.350.200.24550.08.01.01.R
Extra/replacement hardware is available for purchase. We recommend using new hardware when replacing rotors to ensure the rotor ring is attached to the hat properly. Please refer to our Rotor Assembly Instructions for torque specs and detailed instructions.
Specifications:
Diameter: 350mm (13.78")
Thickness (new): 20mm (0.79")
Thickness (min.): 18mm (0.71")
Type: 2-piece floating
Face Pattern: Slotted
Vented / Solid: Directional ventilated
Number of Vanes: 48
Hat Material: Steel w/ integrated iron sleeve for e-brake
Friction Ring Material: CM-250 high carbon alloy cast iron
Rotor Finish: CBN turned
Weight (per rotor): 19.18 lbs (8.7 kg)
Cross Reference:
OEM Nissan/Infiniti 43206-1CA0A
EBC GD7571 / D7571
Centric/StopTech 120.42105 / 121.42105
DBA 2339E
SKU | P2R.023.350.200.24550.08. |
Model # | P2R.023.350.200.24550.08. |
Brand | Paragon Performance Brakes |
Help other RevZone users shop smarter by writing reviews for products you have purchased.